Circuits and Systems Society Malaysia

IEEE
//

Archive for the ‘Activities’ Category

2016 Annual Report

Thursday, January 26th, 2017

IEEE Malaysia Chapter Annual Report

IEEE Circuits and Systems Society

2016

 

PART A – CHAPTER SUMMARY

A.1   Executive Summary

CASS Malaysia Section received World Chapter of the Year Award in year 2016. The society has successfully organized several activities such as DLP (1), Hi-Tea (1), Technical Talks (36), Tutorial/Workshop (3), Winter School (1), School Program (3), Networking Visit (3) and Membership Drive (7). Distinguished Lecturers invited by CAS Malaysia were Prof. Enrico Magli, IEEE Senior Member (Politecnico di Torino, Italy), Prof. Massimo Alioto, IEEE Senior Member (NUS, Singapore), Prof. Amara Amara, IEEE Senior Member (ISEP, France), Prof. Yoshifumi Nishio, IEEE Senior Member (Tokushima University, Japan), Prof. Alan Harvey (RMIT University, Australia), Dr. Jin- Chern Chiou (NCTU, Taiwan), Garrick Orchard (NUS, Singapore) and Lim Lee Wei (HKU, Hong Kong). Apart from them, 11 academic staffs, 2 industry representatives, and 1 postgraduate student were invited to give technical talks during CAS events. CAS Malaysia also awarded 5 students under its Innovative Award, Master Dissertation Award, and PhD Dissertation Award program. This year, CAS Malaysia technical co-sponsored ICED2016, ICEETech2016, ICIAS2016, ICM2016 and IMESS2016 conferences and sponsored 1 competition, which was Undergraduate Final Year Project Competition organized by IEEE Malaysia Section. CAS Malaysia also participated in the IEEE CASS Student Design Competition where 3 groups of students competed at chapter level this year and 2 of them will be representing Malaysia at the Region 10 level. Networking visits to CASS Hyderabad Chapter and Macau Chapter were conducted where chapters shared research ideas and interests. Lastly, congratulations to CASS Malaysia members who are elevated to Senior Member in 2016 and they are Azura Che Soh, Jasronita Jasni, Asnor Juraiza Ishak, Lini Lee, Siti Ruslan, Chin Hu Ong, Jaga Rajendran, Mohd Tafir Mustaffa and Rosdiazli Ibrahim.

A.2   List of Officer and Executive Committee Members

No Name Post Affiliations
1 Fawnizu Azmadi Hussin Past Chair UTP
2 Nurul Amziah Md Yunus Chair UPM
3 Suhaidi Shafie Vice Chair UPM
4 Noor Ain Kamsani Secretary UPM
5 Tang Tong Boon Treasurer UTP
6 Fakhrul Zaman Rokhani Excomm Member UPM
7 Mohd Tafir Mustaffa Excomm Member UPM
8 Mohd Amrallah Mustafa Excomm Member UPM
9 Nor Hisham Hamid Excomm Member UTP
10 Harikrishnan Ramiah Excomm Member UM
11 Lini Lee Excomm Member MMU

 

PART B – CHAPTER ACTIVITIES

B.1   Membership Development Programs

No Date Venue Speaker No of attendees
1 21/04/2016 Senior Member Elevation Workshop Assoc. Prof. Ir. Dr. Harikrishnan Ramiah

40

2 27/4/2016 Asia Pacific University Assoc. Prof. Ir. Dr. Harikrishnan Ramiah

40

3 19/07/2016 Segi College Assoc. Prof. Ir. Dr. Harikrishnan Ramiah

40

4 27/07/2016 IEEE CASS Hi-Tea Networking Dr. Nurul Amziah Md Yunus

70

5 08/08/2016 Multimedia University Assoc. Prof. Ir. Dr. Harikrishnan Ramiah

40

6 27/09/16 Universiti Putra Malaysia Dr. Nurul Amziah Md Yunus

100

7 20/10/2016 Multimedia University Dr. Nurul Amziah Md Yunus

70

B.2   Professional and Continuing Education Activities

Download here.

B.3   E-mail and Newsletter Activities, Home Page

  • http://cas.ieeemy.org/
    • IEEE CASS April 2016
    • IEEE CASS June 2016
    • IEEE CASS October 2016
    • IEEE CASS December 2016
    • IEEE Malaysia Section Q1
    • IEEE Malaysia Section Q2
    • IEEE Malaysia Section Q3
    • IEEE CASS Newsletter Volume 10, Issue 2, April 2016
    • IEEE CASS Newsletter Volume 10, Issue 3, June 2016
    • IEEE CASS Newsletter Volume 10, Issue 5, October 2016
    • IEEE CASS Newsletter Volume 10, Issue 12, December 2016

B.4   Awards

  • 2016 World Chapter of The Year Award
  • 2016 CASS Outreach Initiatives on Asia Pacific Winter School on Bio-Inspired Systems and Prosthetics Device – awarded USD 5,000
  • 2016 R10 CASS Networking Visit (Hyderabad Chapter)– awarded USD 1,000
  • 2016 R10 CASS Networking Visit (Macau Section)– awarded USD 1,000

 

PART C – GOALS AND PLANS

C.1   Goals

C.2  2017 Planned Activities

Activity Type Activity Description Date
dd/mm/year
Technical DLP

Summer/Winter School

PRIMEASIA2017

WiCAS2017

Jan – Nov 2017
Education School Program Aug 2017
Social CAS Networking High-Tea July 2017
Professional Workshops Jan- Dec 2017
Membership Membership Drives Jan-Dec 2017
Others iDLP  

 

PART D – OTHERS

D.1   Special Event

  • PrimeAsia2017
  • WICAS2017

2016 Membership Drive

Thursday, December 1st, 2016

 

  1. UTM, Skudai
  2. APU, SEGI, MMU

 

2016 IEEE CAS DLP Lecture

Thursday, December 1st, 2016

 

  1. Advances in Image/Video Compression using Graph Transforms

2016 Tutorial/ Workshop

Thursday, December 1st, 2016

 

  1. Career and Technical Talks by Intel Malaysia Design Center

2016 School Program

Thursday, December 1st, 2016

 

  1. UPM Engineering Science Fair – Discovering Engineering
  2. LEGO Robotics Workshop
  3. Fun Engineering Session

2016 BIOPRO

Thursday, December 1st, 2016

Flyer 1

Flyer 2

2016 IEEE CAS DLP Lecture: Advances in Image/Video Compression using Graph Transforms

Thursday, December 1st, 2016

IEEE CAS DLP Lecture on Advances in Image/Video Compression using Graph Transforms has been presented by Assoc. Prof. Dr. Enrico Magli from Politecnico di Torino, Italy. The lecture was held on 16 May 2016 from 10:00 a.m to 12:00 p.m in the Tower Block Meeting Room, Faculty of Engineering, Universiti Putra Malaysia. The co-organizer of this lecture are the Institute of Advanced Technology and, Department of Electrical and Electronic Engineering, UPM. Prior to the lecture, Dr. Enrico and participants enjoyed the local breakfast sponsored by IEEE CAS Malaysia Chapter.

The lecture describes technically on recent developments in several areas of image and video compression employing new signal processing and computer vision techniques. After an initial discussion about the future of video compression, the talk centred on graph transforms. The presenter at first addressed the design of graph transforms achieving very good compression efficiency on both piecewise-smooth and natural images, and their application to image compression and intra-frame video compression. Then, he introduced a new video compression paradigm that replaces macro blocks with super pixels, and employs a graph transform to encode each super pixel. Finally, he described a new and very efficient transform, called “steerable” DCT, which is able to orient the DCT basis functions spatially and spectrally so as to adapt to directional features of the block being encoded.

The participations from students, researchers and lectures are quite impressive with the total number of more than 40 participants. The session continued with Q&A after the presentation where the participants and speaker discussed technically on image processing techniques.

At the end of event, a group photo was taken and CASS Malaysia committee members accompanied the speaker for local lunch.
More detail of the event: http://cas.ieeemy.org

Suhaidi Shafie

Vice-Chair IEEE CASS Malaysia Chapter

2016 UPM Engineering Science Fair – Discovering Engineering

Thursday, December 1st, 2016

 

Universiti Putra Malaysia (UPM), Faculty of Engineering : This year on September, 27th , 2016, Faculty of Engineering UPM had organized a science fair event for school kids. The IEEE CAS Society Malaysia has joined the Robotic Club UPM to open the booth at the event.

The student volunteers introduced the school kids about robots and demonstrated how solar cells work to power the robot. Through this activity, they also took the opportunity to introduce school kids to the earliest world known scientists Hebattullah bin Malaka Al-Baghdadi and Muhammad ibn Musa al-Khwarizmi (Father of Modern Algebra and Algorithm).

The theme for the IEEE CASS booth activity was “Science is worth exploring! Go out there my little sunshine! With the biggest dreams in the world!”. These school kids had shown great interests in science while doing activity. The science fair is definitely a good platform for kids giving them a great opportunity to learn about science outside of books and homework.

 

Written by, Nurul Amziah Md Yunus,

Nurul Amziah Md Yunus, PhD.Chair, IEEE CAS M

Chair, IEEE CAS M

 

2016 LEGO Robotics Workshop

Thursday, December 1st, 2016

May 31st to June 1st 2016, IEEE CASS Malaysia together with Universiti Putra Malaysia (UPM) Robotic Club and a local school, Sekolah Kebangsaan Bandar Baru Bangi Jalan 2 organized a LEGO Robotics workshop intended for school students of the age group 7 to 12 years in conjunction with the public school holiday. A total of 50 students from a few states in Malaysia, mostly from neighbouring states, Putrajaya and Selangor joined the 2 days workshop.

The objectives of this workshop are to provide opportunities and exposure to the school students on science, technology, engineering and mathematics (STEM) through robotic design and to infuse enthusiasm and interest in invention and innovation.

The workshop starts with an interesting introduction to the LEGO Mindstorm NXT programmable robotic kit, followed by a few short training modules on creating robot of several categories namely soccer robot and obstacle avoidance robot. On the second day of the workshop, students were grouped into smaller groups and given opportunities to compete in a soccer robot match and obstacle avoidance robot competition, putting their knowledge and creativity to the test. It was interesting to see how these school students work together coming up with interesting solutions for the matches and competitions. Top 3 groups received prizes from IEEE CAS Malaysia.

The school students are very pleased with the workshop, thanks to the team of cheerful and engaging workshop instructors. To IEEE CAS Malaysia delight, majority of them are excited to join this workshop in the future.

 

Written by,

Mohd Amrallah Mustafa

Program Chair LEGO Robotics Workshop (email: amrallah@upm.edu.my)

Half of Participants for Robotic Lego Workshop

2016 Career and Technical Talks by Intel Malaysia Design Center

Thursday, December 1st, 2016

25th April 2016, a career and technical talk was given by Intel Malaysia Design Center delegates at Faculty Engineering, Universiti Putra Malaysia, Selangor. The on-campus career talk is an annual event hold prior to student graduation with the objectives of to educate students on career at Intel Malaysia and sharing of advanced topics in IC design. Intel delegates consists of 8 managers and engineers from 5 Intel groups, namely Data Center Group (DCG), Device Development Group (DDG), Design and Technology Group (DTG), Intellectual Property Group (IPG) and Platform Engineering Group (PEG).There were about 80 students with engineering, science and technology background attended the talk. In the morning session, the event started with a brief introduction about Intel Malaysia Design Center and career opportunity at Intel. Then, each group manager presented their slides, focusing mainly on various design engineering positions in respective group’s job scopes and requirements, working environment and work culture.

There were about 80 students with engineering, science and technology background attended the talk. In the morning session, the event started with a brief introduction about Intel Malaysia Design Center and career opportunity at Intel. Then, each group manager presented their slides, focusing mainly on various design engineering positions in respective group’s job scopes and requirements, working environment and work culture.

Several key-points were discussed during the talk, which include the front-end design of a chipset for mainframe computers and cloud servers, system-on-chip design starting from RTL model to the physical design, and finally to silicon chip tape-out. The design technology solutions that are used across different design groups to improve work productivity were also discussed. In addition, IPG and PEG managers also discussed about the validation and verification on pre- and post-silicon for both processor and peripheral chipset. Lastly, Intel delegates shared the challenges for the engineering jobs such as working with teams of different time zone and working with colleagues of different countries with different cultures.

Following the session is an hour of networking session to promote deeper communication between students with the Intel delegates. Later in the afternoon session, Intel HR manager gave a talk on writing good resume and essential preparation for job interview.

The event is co-organized by IEEE CASS Malaysia chapter, IEEE COMSOC Malaysia chapter and Faculty of Engineering Universiti Putra Malaysia.

 

Written by: Lim Yang Wei & Tan Chee Phang